Equipment Catalog
20 pieces of premium equipment available for rental
FPSO — Floating Production Storage & Offloading
World-class Floating Production, Storage, and Offloading (FPSO) vessel with 200,000 barrels per day oil processing capacity and 100,000 DWT cargo storage. The FPSO is permanently moored via a turret mooring system, allowing the vessel to weathervane freely through 360° in all sea states. Topside processing facilities include a 3-train oil/water/gas separation plant, gas compression and injection system, produced water treatment to IMO MARPOL standards, and an offloading system capable of tandem transfer to shuttle tankers at 10,000 m³/hr. Power generation is provided by four 20MW dual-fuel generators using produced gas. Living quarters accommodate 200 personnel. The vessel is classed by Bureau Veritas, holds DP3 dynamic positioning capability on the turret integrated mooring system, and is fully certified for harsh environment deepwater operations to 2,000m. Comes with full offshore crew complement and asset management contract. Maintenance reserve fund in place. Available on field life-of-project basis.
Capacity
200,000 BOPD / 100,000 DWT Storage
Location
North America — Deepwater Block
Petroleum Tanker Truck — 45,000L
Heavy-duty petroleum tanker truck built on a 6x4 prime mover chassis, paired with a tri-axle aluminum tank trailer with a 45,000-litre capacity. This unit is ADR/DGR certified for the transport of flammable liquids including diesel, petrol, aviation fuel, and light crude oil. The elliptical aluminum tank is divided into 5 separate compartments allowing multi-product loads without cross-contamination. Safety features include emergency shut-off valves, overfill protection sensors, earthing cables, fire extinguishers, and full hazmat placarding. The truck is equipped with GPS fleet tracking, a digital tachograph, and anti-lock brakes. Payload capacity of 30 tonnes. Engine overhauled at 200,000 km. Current road worthiness certificate and carrier permit. Crew training available on request.
Capacity
45,000 Litres
Location
Oslo, Norway
Semi-Submersible Offshore Drilling Rig
Ultra-deepwater semi-submersible drilling rig rated to 3,000 metres water depth and 9,000 metres measured depth. This 6th-generation rig is equipped with a top drive drilling system, 2,000-ton hook load capacity, and a fully automated pipe handling system capable of running 5,400 metres of riser string. The rig operates on dynamic positioning (DP3) with triple redundancy for maximum uptime in extreme weather conditions. Living quarters accommodate 120 personnel with full amenities. Onboard facilities include a 120m² drill floor, mud logging unit, blow-out preventer stack rated to 15,000 PSI, and a certified helideck for S-92/AW139 operations. All equipment maintained under a Class-approved preventive maintenance system. DNV class certificates current. Available on day-rate or turnkey basis.
Capacity
120 POB / 3,000m Water Depth
Location
Gulf of Mexico, USA
VLCC Crude Oil Tanker Ship
Our Very Large Crude Carrier (VLCC) is a state-of-the-art ocean-going oil tanker capable of transporting up to 300,000 tonnes of crude oil across intercontinental routes. Built to the highest DNV class standards, this vessel features double-hull construction for maximum environmental protection, advanced navigation systems including ECDIS and AIS, and full inert gas systems for cargo safety. Equipped with 28 cargo tanks and 2 slop tanks, the vessel handles multiple grades of crude oil simultaneously. Her 21-knot service speed and 30,000nm range make her ideal for VLCC trades between Middle East Gulf, West Africa, and Asia Pacific terminals. Comes with a full crew complement of 32 officers and ratings, all STCW-certified and experienced on VLCC operations. All classification certificates current. Available for time-charter or voyage-charter arrangements.
Capacity
300,000 DWT
Location
Port of Rotterdam, Netherlands
3-Phase Gas-Oil Separator — 15,000 BPD
Horizontal three-phase gas-oil-water separator vessel rated at 15,000 barrels per day liquid throughput. Designed to API 12J and ASME Section VIII Division 1 code, the vessel operates at 600 PSI working pressure and 120°C design temperature, suitable for sour service (NACE MR0175) with H₂S up to 500 ppm. Internal configuration includes a primary inlet cyclone diverter, secondary gravity settling compartment, weir with adjustable liquid level controllers, and a demister mist eliminator pad. Instrumentation includes pressure safety valves, level gauges, temperature transmitters, and control valves all linked to a local control panel with 4–20mA HART outputs. The separator package is fully skidded on a structural steel base with access platforms, handrails, and ladders. Utility connections include fuel gas, instrument air, drain, and vent. Full dimensional datasheet and PFD/P&ID available. Delivery within 6 weeks from Oman yard.
Capacity
15,000 BPD / ASME VIII Rated
Location
Muscat, Oman
Beam Pump Jack — Automated Oil Well
Heavy-duty beam pump jack (sucker rod pump) designed for artificial lift operations on conventional oil wells producing 15–20 barrels per day from depths up to 300 metres. The unit features a 456-inch pumping unit with a 120-inch stroke and a 44,000 ft-lb peak torque gearbox, manufactured by Lufkin Industries. The motor is a 30kW IE3 premium efficiency model with integrated VFD for optimised pump fillage and energy savings. The automated control system monitors downhole pump performance via dynamometer cards, automatically adjusting pump stroke speed to maximise production while preventing pump-off. Remote monitoring via 4G telemetry allows well surveillance from the field office. Complete with sucker rod string, plunger pump assembly, stuffing box, and production header. Suitable for crude oil, water-cut wells, and coal-bed methane operations. Trailer-mounted for quick relocation.
Capacity
20 BPD / 300m Depth
Location
Alberta, Canada
Christmas Tree Wellhead Assembly — 5,000 PSI
API 6A compliant wellhead and Christmas tree assembly rated to 5,000 PSI working pressure with a 4-1/16 inch bore. Manufactured from 60K yield strength carbon steel with Inconel-clad bore and sealing faces for H₂S service (NACE MR0175). The assembly includes a casing spool, tubing head spool, master gate valve, swab valve, two wing valves, and choke manifold — all hydraulically actuated for remote operation from the surface control panel. The tree is rated for 121°C (250°F) maximum operating temperature and H₂S partial pressure up to 340 kPa (PR1 service). All valves are API 6D full-bore ball valves with fire-safe design. The hydraulic control unit (HCU) provides fail-safe closure on loss of hydraulic pressure. Pressure test certificates and material test reports (MTRs) provided. Suitable for vertical, deviated, and horizontal onshore wells. Installation crew and pressure testing equipment available.
Capacity
5,000 PSI WP / 4-1/16" Bore
Location
Houston, TX, USA
Crude Oil Storage Tank Farm — 500,000 BBL
Fully operational crude oil tank farm comprising three fixed-roof atmospheric storage tanks with a combined capacity of 500,000 barrels. Each tank is constructed to API 650 standard using high-tensile carbon steel with full epoxy internal lining for corrosion protection. The facility is equipped with secondary containment bunds rated at 110% tank volume, automatic overfill protection, level gauging, and continuous leak detection systems. All tanks are connected via a dedicated manifold system with ball valve isolation, allowing flexible blending and segregation of crude grades. The facility includes two centrifugal pump sets at 2,000 m³/h throughput each, custody transfer metering to OIML R117 standard, and a full SCADA system for remote monitoring. API 653 inspection current. Located adjacent to deepwater marine terminal with pipeline connectivity to three major refineries.
Capacity
500,000 Barrels Total
Location
Texas City, TX, USA
Gas Compressor Station — 50 MMSCFD
Skid-mounted natural gas compressor station comprising three centrifugal compressor trains, each driven by a Solar Turbines Saturn 20 gas turbine (1,200kW), delivering a combined throughput of 50 million standard cubic feet per day (MMSCFD) at 3,600 PSI discharge pressure. The station is designed for gas gathering, transmission, and reinjection applications. Each train is equipped with inlet separation, inter-stage cooling, lube oil system, dry gas seals, and anti-surge control. The station control system is fully automated with Siemens S7 PLC, remote SCADA interface, and emergency shutdown (ESD) logic compliant with IEC 61511. The entire facility is housed within a weather-proof acoustic enclosure meeting ISO 15664 noise requirements. Fully skidded and modular for rapid site installation within 4 weeks. Current API 670/671 compliance certificates available.
Capacity
50 MMSCFD / 3,600 PSI Discharge
Location
Midland, TX, USA
Heavy Lift Offshore Crane — 800T Capacity
ABS-classed heavy lift offshore crane with an 800-tonne main hook load capacity and 80-metre fully extended boom length. Designed specifically for subsea module installation, deck module replacements, and pipe lay support operations in up to Hs 3.5m sea states. The crane features Active Heave Compensation (AHC) rated for 1,200 tonnes, allowing deepwater lifts at up to 3,000 metres depth with precision control in dynamic conditions. Secondary hook load is 100 tonnes on a 120-metre whip line. The crane slew ring allows 360° rotation with hydraulic brakes on all axes. Control station is climate controlled with full CCTV monitoring of the hook and load. The crane is permanently installed on a semi-submersible crane vessel (SSCV) and comes with a full offshore rigging package including certified slings, shackles, and lift frames. Lift planning services and marine warranty surveyor (MWS) approval support included.
Capacity
800 Tonnes / 80m Boom
Location
Aberdeen, Scotland, UK
High-Pressure Crude Oil Pipeline — 80km Section
A certified 36-inch diameter carbon steel crude oil transmission pipeline spanning 80 kilometres, rated to 1,200 PSI maximum allowable operating pressure (MAOP). Constructed to ASME B31.4 pipeline standard with 3-layer polyethylene external coating and impressed current cathodic protection system in full operation. The pipeline is piggable with full-bore geometry, and smart pigging runs are completed annually for integrity management. The section includes 4 intermediate block valve stations, 2 inline inspection traps, and a SCADA-monitored supervisory control system providing real-time pressure, temperature, and flow data to a 24/7 control room. Maximum throughput of 500,000 barrels per day. Available for tariff-based third-party access. HSE COMAH upper-tier registered. Pipeline integrity management system (PIMS) records available on request.
Capacity
500,000 BPD Throughput
Location
North Sea, UK Sector
Hydraulic Fracturing Fleet — 15,000 PSI Tier 4
Comprehensive hydraulic fracturing (frac) fleet comprising 12 Tier 4 final emission-compliant pump trucks, each delivering 1,500 hydraulic horsepower at up to 15,000 PSI wellhead treating pressure. The fleet is configured for simultaneous zipper fracturing on multi-well pad sites, with total fleet capacity of 18,000 HHP. Pump trucks run on dual-fuel (diesel/CNG) for significant operational cost savings versus diesel-only fleets. Supporting equipment includes a 600-barrel blender unit, 8-unit chemical additive system, data acquisition van with real-time fracture pressure and rate monitoring, and a 500-barrel proppant storage silo system. Fleet management software provides job execution monitoring, pressure, rate, proppant concentration, and density logging in real time. Experienced frac crew of 18 personnel included. Full wellsite safety management system (SMS) compliance with ISNetworld and PEC Premier certifications. Available for unconventional oil/gas, geothermal, and CCUS applications.
Capacity
1,500HP Per Unit / 15,000 PSI
Location
Midland, TX, USA
LNG Carrier Vessel — 140,000 m³ Moss Sphere
Liquefied Natural Gas (LNG) carrier featuring four Moss Rosenberg spherical tanks with a combined cargo capacity of 140,000 cubic metres. The vessel is designed to maintain LNG at -163°C using a closed-loop nitrogen refrigeration system with BOG (boil-off gas) reliquefaction. The Moss-type insulated spherical tanks provide excellent structural integrity in both full and partial load conditions. Propulsion is provided by a dual-fuel diesel electric system consuming LNG boil-off gas as primary fuel, achieving 19.5 knots service speed with a 28,000nm range. The vessel holds Ice Class 1C notation for Baltic operations. Reliquefaction capacity of 3.0 tonne/hour eliminates commercial BOG losses. Full safety systems include inert gas generators, gas detection throughout cargo spaces, and Type-C fire and gas suppression. Delivery available from Yokohama or Singapore on a time-charter basis. Class DNV GL, all certificates current.
Capacity
140,000 m³ LNG
Location
Port of Yokohama, Japan
Land Drilling Rig — 2,000HP AC Drive
High-performance land drilling rig powered by a 2,000HP AC variable frequency drive (VFD) system, rated for drilling to 9,000 metres measured depth in hard rock formations. The mast has a 750-ton static hook load rating with a 165-foot clear height, accommodating 5-inch drill pipe stands. The automated pipe-handling system significantly reduces personnel exposure on the drill floor. The rig package includes a 7,500 PSI triplex pump set (3 pumps), a top drive unit rated to 55,000 ft-lb torque, a fully enclosed drill floor with iron roughneck, and a 500-tonne draw-works. Camp facilities for 60 personnel are included with the package. The rig can be rapidly mobilised by road in 14 truckloads and has a proven rig-up time of under 72 hours. Full drilling BOP stack (5,000 PSI) included. Available on a day-rate or footage basis.
Capacity
9,000m Depth Rated
Location
Permian Basin, TX, USA
Offshore Platform Supply Vessel (PSV) — DP2
Platform Supply Vessel (PSV) with 4,500 DWT deadweight tonnage and a 1,800 square metre open deck for bulk cargo, pipe, and module transport. Rated for DP2 dynamic positioning operations alongside offshore installations in the North Sea and Barents Sea. The vessel operates on a combined diesel-electric and LNG dual-fuel propulsion system, achieving a 40% reduction in CO₂ emissions versus conventional diesel vessels. Liquid mud capacity: 1,800 m³ in 6 tanks. Dry bulk: 400 m³ in 8 silos. Potable water: 500 m³. Fuel oil: 800 m³. The vessel carries full cargo handling equipment including a 3-tonne ship's crane, forklift, and container lashing gear. ERRV (emergency response and rescue vessel) notation allows 150-person rescue operations. Crew of 15 officers and ratings, with 12 spare berths for offshore technicians. Available on spot or period charter. Class LR, ISM/ISPS certified.
Capacity
4,500 DWT / 1,800m² Deck
Location
Bergen, Norway
Oil Refinery Processing Unit — CDU/VDU
Integrated crude distillation unit (CDU) and vacuum distillation unit (VDU) with a combined processing capacity of 50,000 barrels per day. The CDU separates crude oil into LPG, naphtha, kerosene, gas oil, and atmospheric residue fractions using a 120-tray distillation column with structured packing sections. The VDU further processes atmospheric residue into vacuum gas oil and vacuum residue suitable for asphalt production or further upgrading. The unit includes a fired heater train with thermal efficiency of 92%, heat integration via a 24-stage preheat train, desalter package (two-stage electrostatic), and stabiliser column. All vessels are ASME Section VIII Division 1 certified. The control system runs on Honeywell Experion PKS DCS with advanced process control (APC) for yield optimisation. Steam generation capacity of 80 tonnes/hour included. Full P&ID documentation and operations manual provided.
Capacity
50,000 BPD
Location
Jubail Industrial City, Saudi Arabia
Pipeline Excavator — CAT 395 95T
Caterpillar 395 large hydraulic excavator, 95-tonne operating weight class, purpose-configured for pipeline installation and trenching operations. Equipped with a 60-inch hydraulic side-boom attachment and a 7.8m stick reaching 8.5m maximum ground-level reach, this machine can handle 42-inch pipeline lowering operations in a single pass. The Trimble Grade Control system enables GPS-guided trenching to ±25mm accuracy, reducing survey costs and rework. Engine output is 430kW (576HP) running on Stage V emission-compliant diesel. The machine includes an integrated high-pressure hydraulic circuit for attachment versatility including clamshell buckets, vibratory plate compactors, and hydraulic hammers. Remote monitoring via Cat Product Link tracks fuel consumption, working hours, and maintenance intervals in real time. Full operating crew (operator + signaller) and site supervisor available with rental. Transport on low-loader included for moves up to 200km.
Capacity
95T Machine / 8.5m Reach
Location
Calgary, Alberta, Canada
Single Point Mooring Buoy System (CALM)
Catenary Anchor Leg Mooring (CALM) single point mooring (SPM) buoy system designed for the loading and offloading of VLCC tankers up to 300,000 DWT in offshore locations without port infrastructure. The 13-metre diameter steel buoy provides a stable mooring point via a 4-leg catenary anchor chain system, each leg comprising 120-metre sections of 132mm Grade R4S studless chain. The buoy houses a hydraulic swivel stack allowing the tanker to weathervane freely while maintaining continuous crude oil flow at 12,000 m³/hour through a 20-inch swivel and submarine hose system (flexible risers to 60 bar). The hose string is 230 metres long with an integrated emergency release coupling (ERC) for safe disconnection under emergency conditions. Telemetry and SCADA monitoring of buoy position, mooring tensions, and oil flow are transmitted via satellite to the onshore terminal. Full installation, commissioning, and marine warranty survey support included in the rental package.
Capacity
300,000 DWT VLCC Compatible
Location
Gulf of Guinea, West Africa
Subsea ROV — Work Class 3,000m
Work-class remotely operated vehicle (ROV) rated to 3,000 metres water depth, delivering 150 hydraulic horsepower for heavy intervention tasks. Equipped with two 7-function manipulator arms — one force-feedback master-slave arm and one high-power torque arm capable of 1,200 Nm — enabling complex subsea assembly, valve operations, and emergency intervention tasks. Vehicle dimensions: 3.2m L × 1.8m W × 1.6m H; weight in air 3,200 kg. Navigation and survey payload includes a Doppler velocity log (DVL), high-resolution sonar, colour and black-and-white cameras (HD low-light), CP probes, and an inclinometer / heading reference unit. The surface support system includes a 150kVA umbilical power management unit, integrated launch and recovery system (LARS) rated for Hs 3.0m, and a dedicated HPU. Full subsea tooling package available (hot stab tools, torque tools, grippers, water jetting, cutting tools). IMCA R004 compliant ROV crew of 4 included. Deployable from any vessel of opportunity.
Capacity
3,000m Rated / 150HP / 7-Function Manipulator
Location
Singapore
Tanker Semi-Trailer — Tri-Axle Aluminium
Professional-grade aluminium tanker semi-trailer with a 38,000-litre capacity divided into 4 compartments for multi-product petroleum delivery. The elliptical tank is fabricated from 5000-series marine-grade aluminium alloy, giving it exceptional strength-to-weight ratio and resistance to petroleum product corrosion. Tri-axle BPW air-suspension axles provide a smooth ride and even load distribution over varied road conditions. The trailer features bottom-loading API adaptors, vapour recovery connections, emergency shut-off valves activated by pneumatic or cable pull, and 4-inch stainless steel discharge valves per compartment. Anti-rollover protection and electronic stability control are integrated with the trailer's brake system. Suitable for pairing with any 6x4 or 6x2 prime mover with a fifth-wheel coupling. ADR/Hazmat compliant, current roadworthy certificate. Available for short and long-term rental or purchase.
Capacity
38,000 Litres
Location
Miami, FL, USA